Guidance on Designing LED Bulb Labels According to Current Regulations

• “Red” text: Information required by the Ministry of Industry and Trade (this information may be displayed on the bulb, packaging, or user manual; it is not strictly required to follow the distribution in the table below, however, Phuc Gia Testing Laboratory has arranged it logically for Customer reference);
• “Black” text: Information required by the Ministry of Science and Technology (QCVN 19);
• “Red” text highlighted in yellow: Information required by both Ministries – mandatory distribution as per the table below;
• “Blue” text: Information required by the Ministry of Information and Communications;
• “Pink” text: Additional information required by Decree No. 43/2017/ND-CP and Decree No. 111/2021/ND-CP (Decrees on goods labeling).

Important: The information in the table is rated information declared by the manufacturer (except for information on the energy label and ICT conformity stamp – Phuc Gia Testing Laboratory will design and send these to the enterprise).

Reference link: https://phucgia.com.vn/den-led-bulb-noi-dung-ghi-nhan-bat-buoc-theo-qcvn-19.html

2. Rated Voltage (V)

3. Power (W)

4. Rated Frequency (Hz)

5. Luminous Flux (lm)

6. Color Temperature (ºK)

7. Rated Current (A or mA)

8. Manufacturer

9. Model

10. Origin (Country of Origin)

11. Color Rendering Index – CRI

12. Lifetime: in hours (h)

13. Energy Efficiency (lm/W)

14. Power Factor

15. Electricity Consumption after 1000 hours (kWh)

16. Warranty Period (years)

17. Note: “For lamps whose mass is significantly greater than that of the lamps they replace, attention should be drawn to the fact that the increased mass may reduce the mechanical stability of certain luminaires and lampholders and may affect contact and lamp retention.”

18. “Use in dry locations only” or use the following image:

19. Note other special conditions (if any)

Example: Not dimmable

20. Energy Label Stamp

Illustrated Image

21. QCVN 19 Conformity Mark (To be displayed on models that have undergone or will certainly undergo conformity assessment)

Illustrated Image

22. ICT Conformity Mark (if applicable)

This is a demo mark; after completing the ICT conformity certification, request Phuc Gia to support the design and send it to you.

Illustrated Image

23. Year of manufacture

24. Instructions for use, instructions for storage

25. Name and address of the organization or individual responsible for the goods;

26. Origin of goods (Country of manufacture)

In cases where the origin cannot be determined, the place where the final stage of completing the goods was carried out shall be recorded, as stipulated in Clause 3, Article 15 of Decree No. 111/2021/NĐ-CP

27. Name or abbreviation of the organization or individual manufacturing or the organization or individual responsible for the goods abroad

Note: If the size of the goods is insufficient to display all mandatory contents on the label, the contents specified in points 6, 27, and 28 must be recorded on the goods label, while other contents shall be recorded in the accompanying documentation, and the label must indicate where those contents are recorded.