QCVN 110:2023/MIC (Circular No. 15:2023/MIC) – National Technical Regulation on E-UTRA Base Station (BS) – Radio Access

Circular No. 15/2023/MIC, accompanied by QCVN 110:2023/MIC, the National Technical Regulation on E-UTRA Base Station Equipment – Radio Access Part, was issued by the Ministry of Information and Communications on November 24, 2023. This regulation, effective from July 1, 2024, mandates that organizations and individuals involved in the production and business of such equipment in Vietnam must comply with the announced technical standards before placing their products on the market.

See also: Capacity Profile Of Phuc Gia Certification Inspection and Testing Center

I. SCOPE

Circular No. 15/2023/MIC, accompanied by QCVN 110:2023/MIC, applies to both Vietnamese and foreign organizations and individuals involved in the production and business of E-UTRA mobile communication base station equipment operating wholly or partially within the frequency bands specified by this regulation within the territory of Vietnam.

II. MAIN CONTENTS OF CIRCULAR NO. 15/2023/MIC

At the recommendation of the Director of the Department of Science and Technology, the Minister of Information and Communications issued Circular No. 15/2023/MIC on November 24, 2023, stipulating the National Technical Regulation on E-UTRA Mobile Communication Base Station Equipment – Radio Access Part, which will replace Circular No. 24/2017/MIC upon its effective date.

The Chief of Office, the Director of the Department of Science and Technology, heads of agencies and units under the Ministry of Information and Communications, Directors of Provincial and Municipal Departments of Information and Communications, and all relevant organizations and individuals are responsible for implementing this Circular.

III. MAIN CONTENTS OF QCVN 110:2023/MIC – NATIONAL TECHNICAL REGULATION

QCVN 110:2023/MIC was developed by the Post and Telecommunications Institute of Technology, reviewed by the Department of Science and Technology, appraised by the Ministry of Science and Technology, and issued by the Ministry of Information and Communications under Circular No. 15/2023/MIC.

This regulation supersedes QCVN 110:2017/MIC on E-UTRA Mobile Communication Base Station Equipment – Radio Access Part, issued in 2017.

1. Scope

This regulation specifies the technical requirements for E-UTRA mobile communication base station equipment (HS Code: 8517.61.00) operating in whole or in any part of the frequency bands listed in Table 1.

Table 1 – E-UTRA Base Station operating bands

E-UTRA band Direction of transmission Băng tần thiết bị trạm gốc E-UTRA Duplex mode
1 Transmit 2 110 MHz to 2 170 MHz FDD
Receive 1 920 MHz to 1 980 MHz
3 Transmit 1 805 MHz to 1 880 MHz FDD
Receive 1710 MHz to 1 785 MHz
5 Transmit 869 MHz to 880 MHz FDD
Receive 824 MHz to 835 MHz
8 Transmit 925 MHz to 960 MHz FDD
Receive 880 MHz to 915 MHz
28 Transmit 758 MHz to 788 MHz FDD
Receive 703 MHz to 733 MHz
40 Transmit and receive 2 300 MHz to 2 400 MHz TDD
41 Transmit and receive 2 500 MHz to 2 690 MHz TDD

2. Technical Regulation

The technical requirements of QCVN 110:2023/MIC apply under the environmental operating conditions of the equipment as declared by the manufacturer. The equipment must fully comply with all technical requirements of this regulation when operating within the declared boundary limits of these environmental conditions. Suppliers should declare these conditions following the guidance provided in Annex B of this regulation.

The National Technical Regulation on E-UTRA mobile communication base station equipment – Radio Access Part mandates that manufacturers declare the following: the operating frequency bands of the base station, the frequency bands supporting carrier aggregation, and the RF configurations supported as stipulated in 4.6.8 of ETSI TS 136 141. The technical requirements applicable to BS configurations are specified in Annex A of this regulation.

QCVN 110:2023/MIC includes technical requirements for limit levels and testing methods for:

  • Unwanted emissions within the operating band; Adjacent Channel Leakage power Ratio (ACLR);
  • Transmitter spurious emissions;
  • Maximum output power of the base station;
  • Transmitter intermodulation;
  • Receiver spurious emissions;
  • Blocking characteristics;
  • Receiver intermodulation characteristics;
  • Adjacent Channel Selectivity (ACS) and narrowband blocking;
  • Indoor base station output power to protect adjacent TRA channels;
  • Indoor base station output power to protect adjacent E-UTRA channels;
  • Indoor base station output power to protect co-channel E-UTRA;
  • Standard selectivity level;
  • Radiated emissions.

3. Regulatory Provisions under QCVN 110:2023/MIC

  • E-UTRA Mobile Communication Base Station Equipment within the scope defined in Section 1.1 must comply with the technical requirements outlined in this regulation.
  • Operating Frequencies: Must adhere to the management and usage regulations for radio frequencies in Vietnam.
  • Measurement Instruments and Equipment: Must comply with applicable laws on metrology.

IV. DATE OF ISSUANCE

Circular 15/2023/TT-MIC – QCVN 110:2023/MIC comes into effect from July 1, 2024, this circular replaces Circular 24/2017/TT-MIC issued by the Minister of Information and Communications on October 17, 2017, which promulgated the National Technical Regulation on E-UTRA Mobile Communication Base Station Equipment – Radio Access Part.

Click here to load Circular No. 15/2023/MIC – QCVN 110:2023/MIC

Click here download Circular No. 15/2023/MIC – QCVN 110:2023/MIC

For any further information please contact:

PHUC GIA CERTIFICATION CENTER
PHUC GIA INSPECTION & TESTING CENTER

PHUC GIA LABORATORY CORPORATION.
Address: ICD Long Bien, No. 01 Huynh Tan Phat, Sai Dong B Industrial Park, Thach Ban Ward, Long Bien District, Hanoi City, Vietnam.

Head office: Hoa Cuong Building, No. 18, Lane 11, Thai Ha, Trung Liet Ward, Dong Da District, Hanoi City, Vietnam.
Hotline: 0981 996 9960982 996 696/ 024 7779 6696
Email: [email protected]
[email protected][email protected]

Website: phucgia.com.vn
Working time: Monday to Friday 8:00 – 18:30; Saturday 8:00 – 12:00

2024-12-26T15:38:04+07:00
zalo-icon
facebook-icon
linkin-icon
phone-icon