Guidance on Designing Labels for Recessed Fixed Luminaires According to Current Regulations

• “Red” text: Information required by the Ministry of Industry and Trade (this information may be displayed on the lamp, packaging, or user manual; it is not strictly required to follow the distribution in the table below, however, Phuc Gia Testing Laboratory has arranged it logically for Customer reference;
• “Black” text: Information required by the Ministry of Science and Technology (QCVN 19);
• “Red” text highlighted in yellow: Information required by both Ministries – mandatory distribution as per the table below;
• “Blue” text: Information required by the Ministry of Information and Communications;
• “Pink” text: Additional information required by Decree No. 43/2017/NĐ-CP and Decree No. 111/2021/NĐ-CP (Decrees on goods labeling).

Important: The information in the table is rated information declared by the manufacturer (except for information on the energy label and ICT conformity stamp – Phuc Gia Testing Laboratory will design and send these to the enterprise).

Reference link: https://phucgia.com.vn/den-dien-led-thong-dung-co-dinh-va-di-dong-noi-dung-ghi-nhan-bat-buoc-theo-qcvn-19

2. Voltage (V)

3. Rated Maximum Ambient Temperature t_a (If different from 25ºC)

4. Symbol for Class II or III Luminaires (if applicable)

5. IP Code and Electric Shock Protection Class Marking (if any)

6. Model Name / Goods Name

7. Maximum Rated Power of the Light Source (W)

8. Information related to special light bulbs (if any)

9. Terminals must be marked to identify live parts (e.g., N, L, E)

10. Symbol for Luminaires Not Suitable for Covering with Thermal Insulation Material

12. Frequency (Hz):

13. Rated Maximum Working Temperature (of the coil) – t_w

14. Rated Maximum Working Temperature (of the capacitor) – t_c

15. Wiring Diagram

16. Information on Power Factor and Supply Current;

17. Suitability for indoor use, including related ambient temperature

18. Marking of the symbol for the nature of the supply (AC, DC, etc.)

19. Rated Current

20. Meaning of the pictograms/symbols shown on the lamp

21. The following warnings enclosed in “…”:

• “If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similarly qualified person in order to avoid a hazard.”
• “Only to be installed out of arm’s reach”
• “If the lamp belongs to a certain part, that part shall apply”

– For non-replaceable light sources:

• “The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.”

– For light sources not replaceable by the user:

• “The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similarly qualified person.”
• “Terminal block not supplied; installation requires a trained person.”
• “The luminaire shall not in any case be covered with thermal insulating matting or similar material” or display the corresponding label.

22. Energy Label Stamp

Illustrated Image

23. QCVN 19 Conformity Mark (To be displayed on models that have undergone or will certainly undergo conformity assessment)

Illustrated Image

24. ICT Conformity Mark (if applicable)

This is a demo mark; after completing the ICT conformity certification, request Phuc Gia to support the design and send it to the customer.

Illustrated Image

25. Year of manufacture

26. Instructions for use, instructions for storage

27. Name and address of the organization or individual responsible for the goods;

28. Origin of goods (Country of manufacture)

In cases where the origin cannot be determined, the place where the final stage of completing the goods was carried out shall be recorded, as stipulated in Clause 3, Article 15 of Decree No. 111/2021/NĐ-CP

29. Name or abbreviation of the organization or individual manufacturing or the organization or individual responsible for the goods abroad

Note: If the size of the goods is insufficient to display all mandatory contents on the label, the contents specified in points 6, 27, and 28 must be recorded on the goods label, while other contents shall be recorded in the accompanying documentation, and the label must indicate where those contents are recorded.