Guidelines for Designing Tube Light Labels According to Current Regulations

• Information in “red text” is required by the Ministry of Industry and Trade (MOIT) (this information can be displayed on the lamp, packaging, or user manual; the following distribution is not mandatory, but Phuc Gia Laboratory has arranged it reasonably for your reference);
• Information in “black text” is required by the Ministry of Science and Technology (MOST) (QCVN 19);
• Information in “red text” with yellow highlighting is required by both Ministries – and must be distributed according to the following table;
• Information in “blue text” is required by the Ministry of Information and Communications (MIC);
• Information in “pink text” is supplementary information required by Decree No. 43/2017/NĐ-CP and Decree No. 111/2021/NĐ-CP (Decrees on goods labeling).

Important: The information in the table consists of rated data declared by the manufacturer (except for the information on the energy label and the ICT conformity mark – which Phuc Gia Laboratory will design and send to the enterprise).

Reference link: https://phucgia.com.vn/den-led-tube-noi-dung-ghi-nhan-bat-buoc-theo-qcvn-19.html

2. Rated voltage (V)

3. Power (W)

4. Rated frequency (Hz)

5. Luminous flux (lm)

6. Colour temperature (oK)

7. Symbol as follows:

8. The following symbol accompanied by the following information:

“This lamp is not suitable for use in emergency luminaires designed for double-capped fluorescent lamps”

 9. The following symbol:

 10. Rated ambient temperature range of the lamp:

 Example: -20^oC ~ + 60^oC

12. Manufacturer:

13. Model:

14. Origin:

15. Colour Rendering Index – CRI:

16. Lifetime: calculated in hours (h)

17. Energy efficiency (lm/W)

18. Power factor:

19. Energy consumption after 1000 hours: (kWh)

20. Warranty period (years)

21. Meaning of symbols shown on the lamp

22. List of all components:

Example: Lamp cap, driver, printed circuit board, LED chip, optical diffuser…

23. Warning content regarding the non-modification of the luminaire in which the LED lamp is to be replaced

Example: If this luminaire is damaged, it shall be replaced exclusively by the manufacturer, their service agent, or a similarly qualified person in order to avoid a hazard.

24. The following Note must be displayed: “This lamp is designed for general lighting services (not for other purposes, e.g., explosive atmospheres).”

25. Instructions for installation or replacement of the lamp using images or text descriptions;

26. Rated ambient temperature range of the lamp (if different from -20°C ~ +60°C, the following text must be included: “This lamp is not suitable for use in all applications where a traditional fluorescent lamp has been used. The temperature range of this lamp is more restricted. In cases of doubt regarding the suitability of the application, the manufacturer of this lamp should be consulted.”)

27. Note on other special conditions (if any)

Example: Dimmability not allowed

 28. Energy Label Stamp

Illustrated Image

 29. QCVN 19 conformity mark (To be displayed on models that have undergone or are guaranteed to undergo conformity certification).

Illustrated Image

 30. ICT conformity mark (if within the scope of application).

Illustrated Image

31. Year of manufacture.

32. User manual, storage instructions.

33. Name and address of the organization or individual responsible for the goods;

34. Origin of goods (Country of manufacture).

In case the origin cannot be determined, record the place where the final stage of finishing the goods was performed as prescribed in Clause 3, Article 15 of Decree No. 111/2021/NĐ-CP.

35. Name or abbreviation of the manufacturing organization or individual, or the organization or individual responsible for the goods abroad.

Note: In cases where the size of the goods is insufficient to display all mandatory contents on the label, the contents specified in points 6, 27, and 28 must be recorded on the goods label; other contents shall be recorded in the documents accompanying the goods, and the label must indicate where those contents are recorded.